General List of Contaminants removed by Koby Noise Muffler Air Filter/Purifiers

 

Contaminants	Initial Removal Efficiency	% of Carbon Weight Adsorbed for Individual Contaminants1
Oil Mist	99.99%	50-60%
Oil Aerosols	99.99%	50-60%
Oil Vapors	99.99%	50-60%
Hydrocarbon Vapors	99.99%	50-60%
Moisture Droplets	99.99%	30-50%
Fat Vapors	99.99%	40-60%
Dirt	To 0.5 microns	N/A
Atmospheric Dust	To 0.5 microns	N/A
Pipe Scale	To 0.5 microns	N/A
Rust	To 0.5 microns	N/A
Fine Particles	To 0.5 microns	N/A
Smoke Particles	To 0.5 microns	N/A
Bacteria	To 0.5 microns	N/A
Odors	Until Noticeable	N/A
Organic Solvent Vapors	Until Noticeable	15-45%
Trace Organic Gases	Until Noticeable	15-45%
Toxic Vapors	Until Noticeable	15-45%
Water Vapor	Limited2	30-50%
Bulk Liquid Water	Not Removed	N/A
Bulk Liquid Oil	Not Removed	N/A

NOTE: List of contaminants above apply only to M-1-N, M-2-N, KF-2 and DF-0.

1. If more than one contaminant is present in airstream, the percent of carbon weight adsorbed for individual contaminants will vary. For specific information regarding adsorption capacity, and removal efficiency of a particular chemical compound, or contaminant not listed, contact Koby Inc.
2. Koby Air Purifiers will not lower the dewpoint, but will remove enough water vapor to help prevent the formation of condensates at point of air use. Desiccant adsorbents are available to provide outlet pressure dewpoints to -100°F.
N/A-not applicable

Serving Industry for Over 50 Years

Phone: (508) 481-8348 • Fax: (508) 481-1136 • Email: saleskobyfilters@aol.com